Clear All Go to All Filters Clear All Go to All FiltersEach type of exterior finish requires a different method of cleaning.  Please see each finish type below for proper cleaning instructions. You can also reference your Use and Care Guide for additional information.  Painted/Colored Refrigerator Wash the exterior enamel surfaces and gaskets with warm water and mild soap or detergent. We recommend using a clean micro fiber cloth or a soft clean cloth to polish and dry.  Using paper towels may scratch and/or dull the clear coat of the painted door. Regular use of a good household appliance cleaner and polish will help protect the finish. Black Stainless Steel Refrigerator IMPORTANT: To avoid damage to the finish, do not use soap-filled scouring pads, abrasive or harsh cleaners, any cleaning product containing chlorine bleach, steel-wool pads, gritty wash cloths or paper towels. Using these types of products may scratch and/or dull the clear coat of the black stainless steel door.

Wash the exterior surfaces and gaskets with warm water and mild soap or detergent. Ensure to thoroughly dry all surfaces. Traditional Stainless Steel Refrigerator IMPORTANT: To avoid damage to the finish, do not use soap-filled scouring pads, abrasive or harsh cleaners, any cleaning product containing chlorine bleach, steel-wool pads, gritty wash cloths or certain paper towels. To clean and care for your stainless steel surfaces: Spray Affresh™ Stainless Steel cleaner on a clean microfiber cloth. Wipe the stainless steel in the direction of the grain. To restore luster: Use the Affresh™ Stainless steel wipes; follow the recommendations and directions on the label. Wipe off any excess and use special care to avoid contact with any plastic parts, trim pieces, or rubber door gaskets. If the polish does contact any of these plastic parts, clean them with a nonabrasive sponge and mild detergent in warm water. Thoroughly dry the area with a soft cloth. affresh® cleaners are available at many retailers.

If Affresh™ Stainless Steel cleaner is not available: Wash surfaces with warm, soapy water using liquid detergent and a nonabrasive sponge. Always rub evenly in the direction of the grain. Rinse with clean water and dry with a soft, lint-free cloth. Use a clean, dry towel to polish the surface in the direction of the grain until it shines. Water that is not completely dried off can cause discoloration - Water may contain iron that will initiate this discoloration How to Clean Fingerprint Resistant Stainless Steel Wash the exterior surfaces and gaskets with warm water and mild soap or detergent. IMPORTANT: To avoid damage to the finish, do not use soap-filled scouring pads, abrasive or harsh cleaners, any cleaning product containing chlorine bleach, steel-wool pads, gritty wash cloths or paper towels. Using these types of products may scratch and/or dull the clear coat of the black stainless steel door. Most lead-based paint in the United Kingdom was banned from sale to the general public in 1992, apart from for specialist uses.

Prior to this lead compounds had been used as the pigment and drying agent in different types of paint, for example brick and some tile paints Until the early 1960s white lead (lead carbonate/lead sulphate) was added in substantial quantities as the main white pigment in some paint products intended for use as a primer or top coat over metal and wood, both internally and externally. Examples of where this type of paint may have been used are skirting boards, doors, door frames, stairs, banisters, window frames and sills, wooden flooring, radiators, and pipes, though it could also have been applied to any other surface at this time e.g. plaster walls.exterior paint color schemes brown Prior to this the concentration of white lead in paint rose to its highest levels between the years 1930 and 1955, as much as half the volume in some paints, meaning many post-war UK houses have significant amounts of lead in original paint layers.ways to decorate top of christmas tree

In the 1950s, alternative white pigments, such as titanium dioxide, were introduced. In 1963 a voluntary agreement was made between the then Paintmakers' Association, now the British Coatings Federation, and the UK Government that resulted in labeling of paint that contained more than 1% of lead in dry film, with a warning that it should not be applied to surfaces accessible to children.beach wedding decor ideas[2] However white lead-based paints remained in the supply chain and were therefore still in use for some time.best exterior paint color to sell a house Following this, white lead continued to be added to some paint available to professional decorators for specialist use. when should my christmas decorations come down

Additionally, paint with low white lead levels was applied as a thin primer coat to some pre-fabricated domestic wooden windows until the early 1980s. In 1992 European Union legislation[3] was implemented within the UK by the Environmental Protection, part of the Department for Environment, Food and Rural Affairs (DEFRA), as the Controls on Injurious Substances Regulations.[4] This prevented the addition of white lead to almost all paints except those intended for use in historic buildings and as artwork.decorating your home spanish style The lead-based pigments (lead tetroxide/calcium plumbate, or "red lead") were widely used as an anti-corrosive primer coating over exterior steelwork. This type of paint might have been applied to garden gates and railings, guttering and downpipes and other external iron and steel work. Similar red lead-based compounds were also widely used as a jointing compound in engineering, to form steam- or oil-tight flanged joints in pipework.

Red lead in paint was not banned by the 1992 legislation[4] or by more recent EU REACH regulations[5] and the SPAB confirm it is technically available in the UK without special licence.[6] In practice however it has been replaced by safer alternatives (such as red oxide[7]) by most UK/EU paint suppliers; and indeed of those that still supply it, some mistakenly assume it is covered by the 1992 regulations and request approval from a 'competent body' before purchase. Until the early 1970s red, yellow, orange and green lead-based pigments (lead chromate) were added to a limited number of decorative coloured gloss and wall paints. Following this non-lead alternatives were used as pigments. However lead chromate continued to be used in yellow road markings up to the present day.[9] Its use was supposed to cease on 21 May 2015, the sunset date set by EU REACH regulations. However a last minute request for authorization by the Canadian pigment producer Dominion Colour Corporation (DCC) has had preliminary support by the European Chemicals Agency,[10][11] which if approved could see its use continue in road markings until 2022 or later.

Lead (lead naphthenate) was added as a drying agent to some types of paint to ensure the paint surface hardened.[1] In the 1960s this practice was phased out for ordinary paint available to the general public, however its use has not (so far) been banned by legislation. The Lead Paint Safety Association (LiPSA) is a not-for-profit UK organisation that aims to promote awareness and best practice in lead paint safety and compliance. LiPSA's objective is to prevent and ultimately to eliminate childhood and occupational lead poisoning. LiPSA was founded by Tristan Olivier. LiPSA's members include individuals and organisations, especially those in the area of lead paint testing and removal and offers web-based, email and telephone advice in relation to lead paint, including testing strategies. LiPSA also offers an emergency telephone support line for child lead poisoning and/or occupational exposure concerns. ^ "Council Directive 89/677/EEC", The Council of the European Communities, 21 December 1989.